
Electrical Enclosures
Copper Busbars & Earthing Plates
Laser-cut and bent copper busbars, links and earthing plates up to 6 mm.
- Laser cutting
- CNC bending
- Welding
- Finishing
Manufacturing scope
Made to your drawing.
Copper is laser-cut to profile and bent on the press brake, so hole patterns, slots and offsets come out consistent across a batch.
- Flat and offset busbars
- Busbar links and flexible-joint ends
- Earthing plates and earth bars
- Copper and brass terminal plates
Product data
Copper Busbars & Earthing Plates: specifications
Copper busbars, links and earthing plates are laser-cut and bent so hole positions, offsets and lengths repeat across every batch.
Used in
- Panel and switchgear builders
- Earthing systems
- Power electronics
- Max flat blank
- 1500 × 3000 mm
- Max bend length
- 3200 mm
- Laser cutting
- MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm
- Materials
- 3 grades listed
- 01
Flat busbars
Straight bars with bolt holes
- 02
Offset / bent busbars
Single and double offsets
- 03
Earthing plates & bars
Drilled earth bars and plates
- 04
Links & connectors
Short links, spacers and terminal plates
| Thickness | Up to 6 mm copper (laser), thicker on review |
|---|---|
| Max length | Up to 3000 mm (cut) · 3200 mm (bend) |
| Hole patterns | Round, slotted and countersunk holes to drawing |
| Edge finish | Deburred; radius on request |
| Plating | Tin or silver plating through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Copper
Copper (ETP)
IS 191 · C11000 · Cu-ETP
- Laser cut
- up to 6 mm
- Max sheet
- 1500 × 3000 mm
Highest electrical conductivity. Used for busbars, earthing plates and connectors.
| Tensile strength | 220 – 300 MPa (temper dependent) |
|---|---|
| Yield strength | 70 – 250 MPa |
| Elongation | 6 – 45 % |
| Electrical conductivity | ≥ 100 % IACS (annealed) |
| Density | 8.94 g/cm³ |
|---|---|
| Melting point | 1083 °C |
| Thermal conductivity | 388 W/m·K |
| Elastic modulus | 117 GPa |
Copper alloy
Brass
IS 410 · CuZn37 (C27200)
- Laser cut
- confirmed per job
- Max sheet
- 1500 × 3000 mm
Decorative and electrical parts. Laser-cutting thickness is confirmed per job.
| Tensile strength | ≈ 340 – 450 MPa |
|---|---|
| Yield strength | ≈ 150 – 350 MPa |
| Elongation | ≈ 10 – 50 % |
| Hardness | ≈ 60 – 120 HV |
| Density | 8.44 g/cm³ |
|---|---|
| Melting range | 900 – 920 °C |
| Thermal conductivity | ≈ 120 W/m·K |
| Elastic modulus | ≈ 105 GPa |
Aluminium alloy
Aluminium 6061-T6
ASTM B209 · EN AW-6061
- Laser cut
- up to 6 mm
- Max sheet
- 1500 × 3000 mm
Stronger than 5052 but needs larger bend radii. Best for flat or lightly formed plates and brackets.
| Tensile strength | ≥ 290 MPa (typ. 310) |
|---|---|
| Yield strength | ≥ 240 MPa (typ. 276) |
| Elongation | ≈ 10 – 12 % |
| Hardness | ≈ 95 HB |
| Density | 2.70 g/cm³ |
|---|---|
| Melting range | 582 – 652 °C |
| Thermal conductivity | 167 W/m·K |
| Elastic modulus | 69 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Common flat busbar sections
| Width × thickness (mm) | Cross-section | Notes |
|---|---|---|
| 15 × 3 | 45 mm² | |
| 20 × 3 | 60 mm² | |
| 25 × 3 | 75 mm² | |
| 25 × 5 | 125 mm² | |
| 30 × 5 | 150 mm² | |
| 40 × 5 | 200 mm² | |
| 50 × 6 | 300 mm² | |
| 60 × 6 | 360 mm² |
Current rating depends on enclosure, spacing and temperature rise; we make the section you specify.
Questions
Common questions
Which materials can you use for copper busbars & earthing plates?
Common choices are Copper (ETP), Brass, Aluminium 6061-T6. Other grades are quoted on request.
What sizes of copper busbars & earthing plates can you make?
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Do you make copper busbars & earthing plates in small batches?
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
What do you need from me for a quotation?
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Get a quote for Copper Busbars & Earthing Plates
Share the basics now. We follow up for the drawing and any details we need.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.