
Stainless Equipment Fabrication
Kitchen Hoods, Shelving & Racks
Stainless exhaust hoods, wall shelves and storage racks for commercial kitchens.
- Laser cutting
- CNC bending
- Welding
- Finishing
Manufacturing scope
Made to your drawing.
Hoods, shelving and racks are made in food-grade stainless with folded edges, welded corners and the surface finish agreed at quotation.
- Wall and island exhaust hoods
- Wall shelves and pot racks
- Storage and dunnage racks
- Back-splash and wall panels
Product data
Kitchen Hoods, Shelving & Racks: specifications
Hoods, shelves and racks are made in food-grade stainless with folded edges and welded corners, finished to the surface agreed at quotation.
Used in
- Hotels and restaurants
- Institutional kitchens
- Food production
- Max flat blank
- 1500 × 3000 mm
- Max bend length
- 3200 mm
- Laser cutting
- MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm
- Materials
- 3 grades listed
- 01
Wall hoods
With baffle filter frames
- 02
Island hoods
Four-sided
- 03
Wall shelves & pot racks
Folded edges
- 04
Storage racks
Multi-tier racks
| Thickness | 0.9 – 1.5 mm typical |
|---|---|
| Surface | 2B or No. 4 brushed |
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Austenitic stainless
Stainless steel 304
ASTM A240 · EN 1.4301
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless (Cr-Mn)
Stainless steel 202
ASTM A240 / A666 · EN 1.4373
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
Lower-nickel stainless for indoor and decorative parts where 304 corrosion resistance is not required.
| Tensile strength | ≥ 620 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 260 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 100 HRB |
| Density | 7.80 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | ≈ 16 W/m·K |
| Elastic modulus | 200 GPa |
Ferritic stainless
Stainless steel 430
ASTM A240 · EN 1.4016
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
Magnetic, cost-effective stainless for indoor panels, trims and appliance parts.
| Tensile strength | ≥ 450 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 22 % |
| Hardness | ≤ 89 HRB |
| Density | 7.75 g/cm³ |
|---|---|
| Melting range | 1425 – 1510 °C |
| Thermal conductivity | 26.1 W/m·K |
| Elastic modulus | 200 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Common questions
Which materials can you use for kitchen hoods, shelving & racks?
Common choices are Stainless steel 304, Stainless steel 202, Stainless steel 430. Other grades are quoted on request.
What sizes of kitchen hoods, shelving & racks can you make?
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Do you make kitchen hoods, shelving & racks in small batches?
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
What do you need from me for a quotation?
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Get a quote for Kitchen Hoods, Shelving & Racks
Share the basics now. We follow up for the drawing and any details we need.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.