
Fasteners · 07 of 07
Studs & specials
Studs, U-bolts, carriage bolts, anchors and fasteners made to your drawing, in metric, BSW or a special thread.
- Laser cutting
- CNC bending
- Welding
- Finishing
Identify your fastener






Overview
Studs & specials: what and where
Studs, U-bolts, anchors and other specials are manufactured to standard or made to your drawing.
- Standards
- 4
- Size range
- To drawing
- Usual grades
- SS 304 / SS 316
Used in
- Pipe supports
- Flanged joints
- Machine bases
- Site installation
- OEM specials
- Replacement parts
Types
5 types, one family
Studs, special bolts, anchors and fasteners made to drawing. Each type below is manufactured to the standard shown, in the grades listed further down.
- 01
Standard and full thread
Studs
Threaded both ends or full length; used where a bolt head cannot be reached.
Used forFlanges, cylinder heads, panels
- 02
To size
U-bolts
U-shaped bolt with two threaded legs and a cross plate.
Used forPipe and tube clamping
- 03
Square neck
Carriage bolts
Domed head that does not turn once seated.
Used forTimber, guards, trailers
- 04
On request
Anchors and rivets
Anchors for concrete and masonry; rivets for sheet joints.
Used forSite fixing, sheet assemblies
- 05
Your drawing
Made to drawing
Special lengths, threads or heads, reviewed against your drawing.
Used forOEM and replacement parts
Technical data
Standards, sizes and dimensions
| Standard | Description | Size range |
|---|---|---|
| Studs | Standard and full-thread studs | On request |
| Special bolts | Carriage bolts, U-bolts, setscrews | On request |
| Other | Anchors, rivets, cup washers and nails | On request |
| To drawing | Selected custom fasteners | On request |
| Size | Pitch, coarse (mm) |
|---|---|
| M3 | 0.5 |
| M4 | 0.7 |
| M5 | 0.8 |
| M6 | 1.0 |
| M8 | 1.25 |
| M10 | 1.5 |
| M12 | 1.75 |
| M14 | 2.0 |
| M16 | 2.0 |
| M20 | 2.5 |
| M24 | 3.0 |
| M30 | 3.5 |
| M36 | 4.0 |
Nominal values from the standard. Lengths follow the standard series; non-standard lengths on request.
| Types | Studs, U-bolts, carriage bolts, anchors, rivets |
|---|---|
| Thread | Metric, BSW or to drawing |
| Grade | SS 202 / 304 / 316 and others on request |
| Made to drawing | Yes, on review |
| Stainless steel grades | 202 · 304 · 310 · 316 · 316L · 410 |
| Other materials | HT · MS · Copper · Brass · Titanium |
Usually manufactured in:
- SS 304 (A2)
- SS 316 / 316L (A4)
- SS 202
| Grade | Designation | Magnetic | Density | Max service temp. | Best for |
|---|---|---|---|---|---|
| SS 202 | Cr-Mn austenitic | Slightly | 7.80 g/cm³ | ≈ 800 °C | Indoor and dry conditions; lowest cost stainless |
| SS 304 (A2) | EN 1.4301 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | General-purpose; most common stainless fastener |
| SS 316 / 316L (A4) | EN 1.4401 / 1.4404 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | Marine, chemical and food environments |
Choosing
Picking the right one
Quick guidance from the standards. For critical joints, follow your design calculation.
Stud or bolt?
Use a stud when one part is tapped and taken apart often: the thread in the tapped part is not worn by repeated assembly.
U-bolt size
Give the pipe outside diameter, the inside width between legs, the leg length and the thread size.
Specials
Send the drawing with thread, length, head form, grade and quantity. We confirm what we can make or source.
Quick quote
Quote for studs & specials
Tell us the standard, size, length, grade and quantity. We confirm manufacturing lead time and price.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.