
Fasteners · 04 of 07
Machine screws
Phillips and slotted pan, countersunk and cheese head screws, M1.6 to M10, for panels, covers and electrical parts.
- Laser cutting
- CNC bending
- Welding
- Finishing
Identify your fastener





Overview
Machine screws: what and where
Machine screws fix panels, covers and electrical parts into tapped holes or with nuts.
- Standards
- 6
- Size range
- M1.6 – M10
- Usual grades
- SS 304 / SS 316
Used in
- Electrical enclosures
- Control panels
- Instrument housings
- Hinges & fittings
- Rack equipment
- Appliances
Types
6 types, one family
Phillips and slotted pan, countersunk and cheese head screws. Each type below is manufactured to the standard shown, in the grades listed further down.
- 01
DIN 7985 / ISO 7045
Pan head Phillips
Low domed head with a cross recess; the most used panel screw.
Used forElectrical panels, covers, DIN rails
- 02
DIN 965 / ISO 7046
Countersunk Phillips
90° flush head with a cross recess.
Used forHinges, flush covers
- 03
DIN 963 / ISO 2009
Slotted countersunk
Flush head with a single slot.
Used forFittings, legacy assemblies
- 04
DIN 84
Slotted cheese head
Tall cylindrical head with a slot.
Used forTerminals, instruments
- 05
DIN 85
Slotted pan head
Wide low head with a slot.
Used forLight panels, switchgear
- 06
BS 450
Slotted CSK and cheese, inch
Imperial machine screws.
Used forReplacement on older equipment
Technical data
Standards, sizes and dimensions
| Standard | Description | Size range |
|---|---|---|
| DIN 7985 / ISO 7045 | Pan Phillips screws | M1.6 – M10 |
| DIN 965 / ISO 7046 | CSK Phillips screws | M2 – M10 |
| DIN 963 / ISO 2009 | Slotted countersunk screws | M1.6 – M10 |
| DIN 84 | Slotted cheese head screws | M2 – M10 |
| DIN 85 | Slotted pan head screws | M3 – M10 |
| BS 450 | Slotted CSK and cheese head screws | 1/8" – 1/2" |
| Size | Pitch, coarse (mm) |
|---|---|
| M3 | 0.5 |
| M4 | 0.7 |
| M5 | 0.8 |
| M6 | 1.0 |
| M8 | 1.25 |
| M10 | 1.5 |
| M12 | 1.75 |
| M14 | 2.0 |
| M16 | 2.0 |
| M20 | 2.5 |
| M24 | 3.0 |
| M30 | 3.5 |
| M36 | 4.0 |
Nominal values from the standard. Lengths follow the standard series; non-standard lengths on request.
| Drive | Phillips (H) or slotted |
|---|---|
| Head | Pan, countersunk, cheese |
| Thread | M1.6 – M10 metric coarse |
| Grade | SS 304 / 316 |
| Stainless steel grades | 202 · 304 · 310 · 316 · 316L · 410 |
| Other materials | HT · MS · Copper · Brass · Titanium |
Usually manufactured in:
- SS 304 (A2)
- SS 316 / 316L (A4)
| Grade | Designation | Magnetic | Density | Max service temp. | Best for |
|---|---|---|---|---|---|
| SS 304 (A2) | EN 1.4301 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | General-purpose; most common stainless fastener |
| SS 316 / 316L (A4) | EN 1.4401 / 1.4404 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | Marine, chemical and food environments |
Choosing
Picking the right one
Quick guidance from the standards. For critical joints, follow your design calculation.
Phillips or slotted?
Phillips recesses centre the driver and suit power tools on a line. Slotted heads are used on terminals and older equipment.
Tapped hole or nut?
Machine screws need a tapped hole or a nut. For thin sheet without a tapped hole, see self-tapping screws.
Thread engagement
In steel, engage at least one times the diameter; in aluminium, closer to two times.
Quick quote
Quote for machine screws
Tell us the standard, size, length, grade and quantity. We confirm manufacturing lead time and price.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.