
Fasteners · 03 of 07
Socket screws
Allen cap, countersunk, button head and set screws in SS 304 and 316, from M1.6 to M36, for compact high-clamp joints.
- Laser cutting
- CNC bending
- Welding
- Finishing
Identify your fastener




Overview
Socket screws: what and where
Socket screws give high clamp load from a compact head, and fit counterbores where a hex head cannot.
- Standards
- 5
- Size range
- M1.6 – M36
- Usual grades
- SS 304 / SS 316
Used in
- Tooling & fixtures
- Machine slides
- Food equipment
- Guards & covers
- Pulleys & collars
- Instrument housings
Types
5 types, one family
Allen cap, countersunk, button head and set screws. Each type below is manufactured to the standard shown, in the grades listed further down.
- 01
DIN 912 / ISO 4762
Socket head cap screw
Cylindrical head with a hexagon socket; high clamp load from a small head.
Used forDies, fixtures, machine parts in counterbores
- 02
BS 2470
Socket head screw, inch
Imperial Allen cap screw.
Used forImported machine spares
- 03
DIN 7991 / ISO 10642
Socket countersunk screw
90° countersunk head sits flush with the surface.
Used forFlush covers, guides, slides
- 04
ISO 7380
Socket button head screw
Low, rounded head with a wide bearing face.
Used forGuards, panels, visible fixings
- 05
DIN 916 / 913 / 914 / 915
Set (grub) screws
Headless screws: cup, flat, cone and dog point.
Used forLocking pulleys, collars and knobs on shafts
Technical data
Standards, sizes and dimensions
| Standard | Description | Size range |
|---|---|---|
| DIN 912 / ISO 4762 | Socket head cap (Allen) screws | M1.6 – M36 |
| BS 2470 | Socket head screws | 1/4" – 5/8" |
| DIN 7991 / ISO 10642 | Socket countersunk screws | M3 – M24 |
| ISO 7380 | Socket button head screws | M3 – M16 |
| DIN 916 / 913 / 914 / 915 | Set (grub) screws: cup, flat, cone and dog point | M3 – M20 |
| Size | Pitch (mm) | Head diameter (mm) | Head height (mm) | Hex key (mm) |
|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 3 | 2.5 |
| M4 | 0.7 | 7 | 4 | 3 |
| M5 | 0.8 | 8.5 | 5 | 4 |
| M6 | 1.0 | 10 | 6 | 5 |
| M8 | 1.25 | 13 | 8 | 6 |
| M10 | 1.5 | 16 | 10 | 8 |
| M12 | 1.75 | 18 | 12 | 10 |
| M14 | 2.0 | 21 | 14 | 12 |
| M16 | 2.0 | 24 | 16 | 14 |
| M20 | 2.5 | 30 | 20 | 17 |
| M24 | 3.0 | 36 | 24 | 19 |
| M30 | 3.5 | 45 | 30 | 22 |
| M36 | 4.0 | 54 | 36 | 27 |
Nominal values from the standard. Lengths follow the standard series; non-standard lengths on request.
| Drive | Hexagon socket (Allen) |
|---|---|
| Head | Cap, countersunk, button, set screw |
| Property class | A2-70 / A4-70 |
| Finish | Plain stainless |
| Stainless steel grades | 202 · 304 · 310 · 316 · 316L · 410 |
| Other materials | HT · MS · Copper · Brass · Titanium |
Usually manufactured in:
- SS 304 (A2)
- SS 316 / 316L (A4)
| Grade | Designation | Magnetic | Density | Max service temp. | Best for |
|---|---|---|---|---|---|
| SS 304 (A2) | EN 1.4301 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | General-purpose; most common stainless fastener |
| SS 316 / 316L (A4) | EN 1.4401 / 1.4404 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | Marine, chemical and food environments |
Choosing
Picking the right one
Quick guidance from the standards. For critical joints, follow your design calculation.
Cap, button or countersunk?
Cap heads give the most clamp. Button heads look neater on guards and panels. Countersunk heads sit flush where nothing may stand proud.
Which set screw point?
Cup point (DIN 916) bites onto a round shaft. Flat point (DIN 913) suits frequent adjustment. Cone (914) and dog point (915) locate into a drilled spot.
Stainless strength
Stainless socket screws are usually A2-70 or A4-70. Where a 12.9 alloy screw was specified, check the load before switching to stainless.
Size finder
Pick a size. See the numbers.
Thread pitch, spanner size, head and nut heights, Allen key and washer dimensions for ISO metric coarse fasteners.
- Pitch
- mm, coarse
- Spanner (ISO)
- mm across flats
- Spanner (DIN)
- mm across flats
- Bolt head height
- mm, ISO 4017
- Nut height
- mm, ISO 4032
- Allen key
- mm, ISO 4762
- Plain washer
- d1 × d2 × s, DIN 125A
- Spring washer
- d2 × s, DIN 127B
Quick quote
Quote for socket screws
Tell us the standard, size, length, grade and quantity. We confirm manufacturing lead time and price.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.