Materials
SS 304 or SS 316 selected to the service environment.

Stainless Equipment Fabrication
Stainless steel cabinets and equipment housings with agreed surface finish.
Manufacturing scope
Stainless cabinets and housings are cut, formed and welded with surface finish, weld treatment and edge condition agreed before production.
Illustrative geometry; final design follows your approved drawing.Technical review
SS 304 or SS 316 selected to the service environment.
Laser cutting, CNC bending, fibre laser or TIG welding, grinding and polishing.
Surface condition, weld finishing, sharp edges, door fit and dimensions.
Typical customers: Food-equipment, pharmaceutical-equipment and laboratory-equipment manufacturers.
Offerings cover non-pressure fabrication. Hygienic, sterile or other regulated duties require application-specific design and validation.
Related products
Product data
Stainless cabinets and housings are made with folded edges, welded corners and the surface finish you specify, for clean areas and wash-down zones.
Used in
Hinged or sliding doors
With adjustable feet
Around machines and motors
Small stainless boxes
| Thickness | 1 – 2 mm typical |
|---|---|
| Surface | 2B, No. 4 brushed or polished as specified |
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Austenitic stainless
ASTM A240 · EN 1.4301
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless
ASTM A240 · EN 1.4401 / 1.4404
2 – 3 % molybdenum for better resistance to chlorides and cleaning chemicals. Used for food, pharma and coastal sites.
| Tensile strength | ≥ 515 MPa (316L ≥ 485) |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa (316L ≥ 170) |
| Elongation | ≥ 40 % |
| Hardness | ≤ 95 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1375 – 1400 °C |
| Thermal conductivity | 16.3 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless (Cr-Mn)
ASTM A240 / A666 · EN 1.4373
Lower-nickel stainless for indoor and decorative parts where 304 corrosion resistance is not required.
| Tensile strength | ≥ 620 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 260 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 100 HRB |
| Density | 7.80 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | ≈ 16 W/m·K |
| Elastic modulus | 200 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Mainly SS 304 and SS 316/316L, plus SS 202 and 430 where the application allows.
No. We fabricate non-pressure stainless cabinets, housings, trays and frames. Pressure vessels and validated sterile equipment need separate engineering.
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Share the basics now. We follow up for the drawing and any details we need.
Quote checklist
Tap what you already have
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.
Your privacy choices
We use necessary storage to run this site and remember your choices. With your consent we also use Google analytics and marketing tags to understand how the site is used, and load the Google Maps location map. These can set cookies. You can change this any time under “Cookie settings”. Privacy policy
Vinay Metal
Sales team · replies on WhatsAppContinue on WhatsApp
Scan with your phone camera. WhatsApp opens with your message ready to send to Daksh Shah.
Open WhatsApp