One supplier = one purchase order
Cutting, bending, welding and finishing are planned as one requirement, so your parts follow one coordinated route from flat blank to finished assembly.


About us
A three-generation family business since 1996. Our 550 m² unit in Taloja MIDC runs fibre laser cutting, five-axis CNC bending, welding and finishing in-house. Your parts follow one coordinated route on one purchase order, from drawing review to repeat batches.
About Vinay Metal
Our products
Enclosures, machine housings, brackets and welded subassemblies across six product families. Each part is quoted against your drawing revision, material and batch size.
Junction BoxesElectrical Enclosures
Control Panel & Cabinet BodiesElectrical Enclosures
Gland & Mounting PlatesElectrical Enclosures
Precision Brackets & SupportsOEM Sheet Metal Components
Channels & TraysOEM Sheet Metal Components
Welded SubassembliesOEM Sheet Metal Components
Machine Cladding & Access PanelsMachine Covers & Housings
Equipment & Instrument HousingsMachine Covers & Housings
Conveyor ComponentsMachine Covers & Housings
SS Cabinets & HousingsStainless Equipment Fabrication
Worktables & TraysStainless Equipment Fabrication
Industrial TrolleysStainless Equipment Fabrication
Rack Shelves & Blanking PanelsRack & Electronics Components
Chassis & Mounting ComponentsRack & Electronics Components
Decorative Screens & PartitionsArchitectural Metalwork
SignageArchitectural Metalwork
Furniture FramesArchitectural Metalwork
Distribution & Meter BoxesElectrical Enclosures
Copper Busbars & Earthing PlatesElectrical Enclosures
Machine Guards & Safety PanelsMachine Covers & Housings
Hoppers & ChutesMachine Covers & Housings
Base Plates, Flanges & GussetsOEM Sheet Metal Components
Laser-Cut Profiles & BlanksOEM Sheet Metal Components
Kitchen Hoods, Shelving & RacksStainless Equipment Fabrication
Network & Wall-Mount CabinetsRack & Electronics Components
Facade & Railing PanelsArchitectural Metalwork
Cutting, bending, welding and finishing are planned as one requirement, so your parts follow one coordinated route from flat blank to finished assembly.

Materials, interfaces and inspection points are reviewed against your drawing revision before production starts.

Tooling, bend sequence and setup are recorded on the five-axis press brake, so repeat orders follow the approved sample.

Prototype approval, batch size, finishing and delivery requirements are agreed up front. Ratings and certifications are confirmed separately in the quotation.

Capacity check
Pick the material and enter the thickness and longest bend. You get an instant check against our machine limits.
Flat blanks up to 1500 × 3000 mm
A quick guide only. Bend tonnage depends on material, thickness, die and length, so every part is confirmed on the drawing.
Fastener manufacturing · since 1996
We manufacture bolts, nuts, screws, washers and studs in SS 202, 304, 310 and 316 to DIN, ISO, IS and BS, in standard patterns or to your drawing.
Full fastener range
Hexagon bolts carry most structural and machine joints. Full-thread (DIN 933) suits short grips and general fixing; part-thread (DIN 931) gives a plain shank for shear loads.

Nuts are matched to the bolt grade. Nylock nuts resist vibration, thin jam nuts lock a second nut, and cap nuts cover exposed thread ends.

Socket screws give high clamp load from a compact head, and fit counterbores where a hex head cannot.

Machine screws fix panels, covers and electrical parts into tapped holes or with nuts.

Self-tapping screws form their own thread in sheet metal, which removes a tapping operation on thin panels.

Washers spread load under the head or nut. Spring and toothed washers help resist loosening, and taper washers sit square on channel and beam flanges.

Studs, U-bolts, anchors and other specials are manufactured to standard or made to your drawing.
How we work
DXF, DWG, STEP or PDF with revision, material, quantity and finish.
We check bends, cut-outs and welds against our machines and reply with a quotation.
A first-off or sample batch is made and checked against your drawing.
Bend programs and setups are recorded so repeat batches match the sample.
Materials
Typical mechanical and physical properties, with our laser cutting limit for each grade.
Carbon steel
IS 513 (CR1–CR4) · DC01–DC04
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Carbon steel
IS 2062 E250 · S235 / S275
Heavier plate for base plates, flanges, frames and structural brackets.
| Tensile strength | ≥ 410 MPa |
|---|---|
| Yield strength | ≥ 250 MPa |
| Elongation | ≥ 23 % |
| Hardness | ≈ 120 – 160 HB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Coated carbon steel
IS 277 · coating Z120 – Z275
Pre-galvanised sheet for trays, ducts and covers that need corrosion protection without painting.
| Tensile strength | ≈ 270 – 500 MPa (base grade) |
|---|---|
| Yield strength | ≈ 180 – 350 MPa |
| Elongation | ≥ 22 % |
| Zinc coating | 120 – 275 g/m² (both sides) |
| Density | 7.85 g/cm³ |
|---|---|
| Zinc melting point | 420 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Austenitic stainless
ASTM A240 · EN 1.4301
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless
ASTM A240 · EN 1.4401 / 1.4404
2 – 3 % molybdenum for better resistance to chlorides and cleaning chemicals. Used for food, pharma and coastal sites.
| Tensile strength | ≥ 515 MPa (316L ≥ 485) |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa (316L ≥ 170) |
| Elongation | ≥ 40 % |
| Hardness | ≤ 95 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1375 – 1400 °C |
| Thermal conductivity | 16.3 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless (Cr-Mn)
ASTM A240 / A666 · EN 1.4373
Lower-nickel stainless for indoor and decorative parts where 304 corrosion resistance is not required.
| Tensile strength | ≥ 620 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 260 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 100 HRB |
| Density | 7.80 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | ≈ 16 W/m·K |
| Elastic modulus | 200 GPa |
Ferritic stainless
ASTM A240 · EN 1.4016
Magnetic, cost-effective stainless for indoor panels, trims and appliance parts.
| Tensile strength | ≥ 450 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 22 % |
| Hardness | ≤ 89 HRB |
| Density | 7.75 g/cm³ |
|---|---|
| Melting range | 1425 – 1510 °C |
| Thermal conductivity | 26.1 W/m·K |
| Elastic modulus | 200 GPa |
Aluminium alloy
ASTM B209 · EN AW-5052
Bends well and resists corrosion. The usual aluminium for formed housings, chassis and panels.
| Tensile strength | 215 – 265 MPa |
|---|---|
| Yield strength | ≥ 160 MPa |
| Elongation | 7 – 12 % |
| Hardness | ≈ 60 HB |
| Density | 2.68 g/cm³ |
|---|---|
| Melting range | 607 – 649 °C |
| Thermal conductivity | 138 W/m·K |
| Elastic modulus | 70 GPa |
Aluminium alloy
ASTM B209 · EN AW-6061
Stronger than 5052 but needs larger bend radii. Best for flat or lightly formed plates and brackets.
| Tensile strength | ≥ 290 MPa (typ. 310) |
|---|---|
| Yield strength | ≥ 240 MPa (typ. 276) |
| Elongation | ≈ 10 – 12 % |
| Hardness | ≈ 95 HB |
| Density | 2.70 g/cm³ |
|---|---|
| Melting range | 582 – 652 °C |
| Thermal conductivity | 167 W/m·K |
| Elastic modulus | 69 GPa |
Copper
IS 191 · C11000 · Cu-ETP
Highest electrical conductivity. Used for busbars, earthing plates and connectors.
| Tensile strength | 220 – 300 MPa (temper dependent) |
|---|---|
| Yield strength | 70 – 250 MPa |
| Elongation | 6 – 45 % |
| Electrical conductivity | ≥ 100 % IACS (annealed) |
| Density | 8.94 g/cm³ |
|---|---|
| Melting point | 1083 °C |
| Thermal conductivity | 388 W/m·K |
| Elastic modulus | 117 GPa |
Copper alloy
IS 410 · CuZn37 (C27200)
Decorative and electrical parts. Laser-cutting thickness is confirmed per job.
| Tensile strength | ≈ 340 – 450 MPa |
|---|---|
| Yield strength | ≈ 150 – 350 MPa |
| Elongation | ≈ 10 – 50 % |
| Hardness | ≈ 60 – 120 HV |
| Density | 8.44 g/cm³ |
|---|---|
| Melting range | 900 – 920 °C |
| Thermal conductivity | ≈ 120 W/m·K |
| Elastic modulus | ≈ 105 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
A drawing or DXF with revision, material grade and thickness, quantity, finish and the delivery date. A STEP file helps for formed and welded parts.
Flat parts up to 1500 × 3000 mm from one sheet, and bends up to 3200 mm long on the 100-ton press brake. Larger assemblies are made in welded or bolted sections.
On the 3 kW fibre laser: mild steel up to 20 mm, stainless steel up to 12 mm, and aluminium and copper up to 6 mm.
Yes. We make prototypes for approval, then repeat batches using the recorded bend programs and setups from the approved sample.
Deburring, grinding and polishing are done in-house. Powder coating, plating and PVD are coordinated with approved suppliers, so you can order finished parts on one purchase order.
Yes. We have manufactured stainless steel bolts, nuts, screws, washers and studs since 1996, in DIN, ISO, IS and BS patterns, in our own fastener manufacturing setup.
Quick quote
Share the basics now. We reply with a quotation or questions on your drawing.
Quote checklist
Tap what you already have
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.
Your privacy choices
We use necessary storage to run this site and remember your choices. With your consent we also use Google analytics and marketing tags to understand how the site is used, and load the Google Maps location map. These can set cookies. You can change this any time under “Cookie settings”. Privacy policy
Vinay Metal
Sales team · replies on WhatsAppContinue on WhatsApp
Scan with your phone camera. WhatsApp opens with your message ready to send to Daksh Shah.
Open WhatsApp