Materials
SS 304 or SS 316 selected to the service environment; mild steel where specified.

Stainless Equipment Fabrication
Stainless and mild-steel trolley frames made to your drawing.
Manufacturing scope
Trolley frames, shelves and handles are fabricated to your layout. Castors and other bought-out hardware are fitted to the agreed specification.
Illustrative geometry; final design follows your approved drawing.Technical review
SS 304 or SS 316 selected to the service environment; mild steel where specified.
Laser cutting, CNC bending, TIG / arc or laser welding and finishing.
Frame squareness, weld finish, sharp edges, dimensions and agreed load requirements.
Typical customers: Food, pharmaceutical, laboratory and industrial equipment users.
Offerings cover non-pressure fabrication. Hygienic, sterile or other regulated duties require application-specific design and validation.
Related products
Product data
Trolley frames, decks and trays are welded to your load and layout, in stainless or mild steel.
Used in
Flat deck
Two or three tiers
Runners for trays
For process bins
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
|---|---|
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Castors | Fitted as specified |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Austenitic stainless
ASTM A240 · EN 1.4301
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless (Cr-Mn)
ASTM A240 / A666 · EN 1.4373
Lower-nickel stainless for indoor and decorative parts where 304 corrosion resistance is not required.
| Tensile strength | ≥ 620 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 260 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 100 HRB |
| Density | 7.80 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | ≈ 16 W/m·K |
| Elastic modulus | 200 GPa |
Carbon steel
IS 513 (CR1–CR4) · DC01–DC04
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Carbon steel
IS 2062 E250 · S235 / S275
Heavier plate for base plates, flanges, frames and structural brackets.
| Tensile strength | ≥ 410 MPa |
|---|---|
| Yield strength | ≥ 250 MPa |
| Elongation | ≥ 23 % |
| Hardness | ≈ 120 – 160 HB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Common choices are Stainless steel 304, Stainless steel 202, CRCA mild steel, Hot-rolled structural steel. Other grades are quoted on request.
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Share the basics now. We follow up for the drawing and any details we need.
Quote checklist
Tap what you already have
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.
Your privacy choices
We use necessary storage to run this site and remember your choices. With your consent we also use Google analytics and marketing tags to understand how the site is used, and load the Google Maps location map. These can set cookies. You can change this any time under “Cookie settings”. Privacy policy
Vinay Metal
Sales team · replies on WhatsAppContinue on WhatsApp
Scan with your phone camera. WhatsApp opens with your message ready to send to Daksh Shah.
Open WhatsApp