
OEM Sheet Metal Components
Laser-Cut Profiles & Blanks
Flat profiles, blanks, name plates and kits cut from your DXF.
- Laser cutting
- CNC bending
- Welding
- Finishing
Manufacturing scope
Made to your drawing.
Send a DXF or drawing and we cut flat parts directly, nested on the sheet for material yield, ready for your own forming or assembly.
- Blanks for your own forming
- Name plates and tags
- Spacers, shims and washers to drawing
- Prototype and short-run kits
Product data
Laser-Cut Profiles & Blanks: specifications
Flat parts are cut directly from your DXF or drawing and nested for material yield, from single prototypes to repeat kits.
Used in
- OEM prototypes
- Fabricators and job shops
- Signage and decor
- Max flat blank
- 1500 × 3000 mm
- Max bend length
- 3200 mm
- Laser cutting
- MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm
- Materials
- 8 grades listed
- 01
Blanks
For your own forming
- 02
Name plates & tags
Cut and marked
- 03
Shims & spacers
Thin flat parts to drawing
- 04
Prototype kits
Mixed parts for trials
| Max sheet | 1500 × 3000 mm |
|---|---|
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Files accepted | DXF, DWG, STEP and PDF drawings |
| Nesting | Parts nested on the sheet for material yield |
| Inspection | Dimensions checked against your drawing revision before dispatch |
| Order size | Prototype, pilot and repeat batches |
Carbon steel
CRCA mild steel
IS 513 (CR1–CR4) · DC01–DC04
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Carbon steel
Hot-rolled structural steel
IS 2062 E250 · S235 / S275
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Heavier plate for base plates, flanges, frames and structural brackets.
| Tensile strength | ≥ 410 MPa |
|---|---|
| Yield strength | ≥ 250 MPa |
| Elongation | ≥ 23 % |
| Hardness | ≈ 120 – 160 HB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Coated carbon steel
Galvanised steel (GI / GP)
IS 277 · coating Z120 – Z275
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Pre-galvanised sheet for trays, ducts and covers that need corrosion protection without painting.
| Tensile strength | ≈ 270 – 500 MPa (base grade) |
|---|---|
| Yield strength | ≈ 180 – 350 MPa |
| Elongation | ≥ 22 % |
| Zinc coating | 120 – 275 g/m² (both sides) |
| Density | 7.85 g/cm³ |
|---|---|
| Zinc melting point | 420 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Austenitic stainless
Stainless steel 304
ASTM A240 · EN 1.4301
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless
Stainless steel 316 / 316L
ASTM A240 · EN 1.4401 / 1.4404
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
2 – 3 % molybdenum for better resistance to chlorides and cleaning chemicals. Used for food, pharma and coastal sites.
| Tensile strength | ≥ 515 MPa (316L ≥ 485) |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa (316L ≥ 170) |
| Elongation | ≥ 40 % |
| Hardness | ≤ 95 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1375 – 1400 °C |
| Thermal conductivity | 16.3 W/m·K |
| Elastic modulus | 193 GPa |
Aluminium alloy
Aluminium 5052-H32
ASTM B209 · EN AW-5052
- Laser cut
- up to 6 mm
- Max sheet
- 1500 × 3000 mm
Bends well and resists corrosion. The usual aluminium for formed housings, chassis and panels.
| Tensile strength | 215 – 265 MPa |
|---|---|
| Yield strength | ≥ 160 MPa |
| Elongation | 7 – 12 % |
| Hardness | ≈ 60 HB |
| Density | 2.68 g/cm³ |
|---|---|
| Melting range | 607 – 649 °C |
| Thermal conductivity | 138 W/m·K |
| Elastic modulus | 70 GPa |
Copper
Copper (ETP)
IS 191 · C11000 · Cu-ETP
- Laser cut
- up to 6 mm
- Max sheet
- 1500 × 3000 mm
Highest electrical conductivity. Used for busbars, earthing plates and connectors.
| Tensile strength | 220 – 300 MPa (temper dependent) |
|---|---|
| Yield strength | 70 – 250 MPa |
| Elongation | 6 – 45 % |
| Electrical conductivity | ≥ 100 % IACS (annealed) |
| Density | 8.94 g/cm³ |
|---|---|
| Melting point | 1083 °C |
| Thermal conductivity | 388 W/m·K |
| Elastic modulus | 117 GPa |
Copper alloy
Brass
IS 410 · CuZn37 (C27200)
- Laser cut
- confirmed per job
- Max sheet
- 1500 × 3000 mm
Decorative and electrical parts. Laser-cutting thickness is confirmed per job.
| Tensile strength | ≈ 340 – 450 MPa |
|---|---|
| Yield strength | ≈ 150 – 350 MPa |
| Elongation | ≈ 10 – 50 % |
| Hardness | ≈ 60 – 120 HV |
| Density | 8.44 g/cm³ |
|---|---|
| Melting range | 900 – 920 °C |
| Thermal conductivity | ≈ 120 W/m·K |
| Elastic modulus | ≈ 105 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Common questions
What is your maximum laser cutting thickness?
Mild steel up to 20 mm, stainless steel up to 12 mm, and aluminium and copper up to 6 mm, on a 3 kW fibre laser with a 1500 x 3000 mm bed.
Which file format should I send for laser cutting?
A DXF or DWG at 1:1 scale is best. A PDF with dimensions also works; we redraw it for cutting.
What do you need from me for a quotation?
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Get a quote for Laser-Cut Profiles & Blanks
Share the basics now. We follow up for the drawing and any details we need.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.