
Rack & Electronics Components
Network & Wall-Mount Cabinets
Wall-mount and floor network cabinet bodies with 19-inch mounting rails.
- Laser cutting
- CNC bending
- Welding
- Finishing
Manufacturing scope
Made to your drawing.
Cabinet bodies are folded from sheet with 19-inch rails positioned to your rack-unit layout, cable entries and ventilation cut to drawing.
- Wall-mount network cabinets
- Floor-standing rack cabinet bodies
- Front, side and rear doors
- Cable managers and vented panels
Product data
Network & Wall-Mount Cabinets: specifications
Network cabinet bodies are folded from sheet with 19-inch rails set to your rack-unit layout, and cable entries and ventilation cut to drawing.
Used in
- IT and telecom integrators
- Security and CCTV
- Offices and buildings
- Max flat blank
- 1500 × 3000 mm
- Max bend length
- 3200 mm
- Laser cutting
- MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm
- Materials
- 3 grades listed
- 01
Wall-mount cabinets
6U – 15U
- 02
Floor cabinets
22U – 42U bodies
- 03
Doors
Glass-frame, perforated or solid
- 04
Accessories
Shelves, fan plates, cable managers
| Thickness | 1.2 – 2 mm typical |
|---|---|
| Interface | 19-inch EIA-310 rails |
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Carbon steel
CRCA mild steel
IS 513 (CR1–CR4) · DC01–DC04
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Coated carbon steel
Galvanised steel (GI / GP)
IS 277 · coating Z120 – Z275
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Pre-galvanised sheet for trays, ducts and covers that need corrosion protection without painting.
| Tensile strength | ≈ 270 – 500 MPa (base grade) |
|---|---|
| Yield strength | ≈ 180 – 350 MPa |
| Elongation | ≥ 22 % |
| Zinc coating | 120 – 275 g/m² (both sides) |
| Density | 7.85 g/cm³ |
|---|---|
| Zinc melting point | 420 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Aluminium alloy
Aluminium 5052-H32
ASTM B209 · EN AW-5052
- Laser cut
- up to 6 mm
- Max sheet
- 1500 × 3000 mm
Bends well and resists corrosion. The usual aluminium for formed housings, chassis and panels.
| Tensile strength | 215 – 265 MPa |
|---|---|
| Yield strength | ≥ 160 MPa |
| Elongation | 7 – 12 % |
| Hardness | ≈ 60 HB |
| Density | 2.68 g/cm³ |
|---|---|
| Melting range | 607 – 649 °C |
| Thermal conductivity | 138 W/m·K |
| Elastic modulus | 70 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Common network cabinet sizes (made to order)
| Size | Height (approx.) | Depth options |
|---|---|---|
| 6U wall | ≈ 370 mm | 450 / 550 mm |
| 9U wall | ≈ 500 mm | 450 / 550 mm |
| 12U wall | ≈ 635 mm | 450 / 550 mm |
| 27U floor | ≈ 1400 mm | 600 / 800 mm |
| 42U floor | ≈ 2050 mm | 800 / 1000 mm |
External height depends on top, base and door design.
Questions
Common questions
Which materials can you use for network & wall-mount cabinets?
Common choices are CRCA mild steel, Galvanised steel (GI / GP), Aluminium 5052-H32. Other grades are quoted on request.
What sizes of network & wall-mount cabinets can you make?
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Do you make network & wall-mount cabinets in small batches?
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
What do you need from me for a quotation?
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Get a quote for Network & Wall-Mount Cabinets
Share the basics now. We follow up for the drawing and any details we need.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.