
Machine Covers & Housings
Hoppers & Chutes
Fabricated hoppers, chutes and transfer guides for bulk handling equipment.
- Laser cutting
- CNC bending
- Welding
- Finishing
Manufacturing scope
Made to your drawing.
Hoppers and chutes are developed from your drawing, cut as flat blanks, formed in sections and welded into a finished body.
- Feed hoppers and bins
- Discharge chutes and transfer guides
- Inspection doors and flanges
- Wear liners and side skirts
Product data
Hoppers & Chutes: specifications
Hoppers and chutes are developed into flat blanks, formed in sections and welded into finished bodies with flanges and inspection doors.
Used in
- Food and pharma equipment
- Bulk handling
- Recycling machinery
- Max flat blank
- 1500 × 3000 mm
- Max bend length
- 3200 mm
- Laser cutting
- MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm
- Materials
- 4 grades listed
- 01
Feed hoppers
Square or rectangular to round
- 02
Chutes
Straight and curved
- 03
Transfer guides
Between conveyors
- 04
Bins
Collection bins
| Thickness | 1.5 – 6 mm typical |
|---|---|
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Welding | Laser welding: MS 6 mm · SS 5 mm · Al 3 mm; TIG / arc for heavier joints |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
Carbon steel
Hot-rolled structural steel
IS 2062 E250 · S235 / S275
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Heavier plate for base plates, flanges, frames and structural brackets.
| Tensile strength | ≥ 410 MPa |
|---|---|
| Yield strength | ≥ 250 MPa |
| Elongation | ≥ 23 % |
| Hardness | ≈ 120 – 160 HB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Carbon steel
CRCA mild steel
IS 513 (CR1–CR4) · DC01–DC04
- Laser cut
- up to 20 mm
- Max sheet
- 1500 × 3000 mm
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Austenitic stainless
Stainless steel 304
ASTM A240 · EN 1.4301
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Austenitic stainless
Stainless steel 316 / 316L
ASTM A240 · EN 1.4401 / 1.4404
- Laser cut
- up to 12 mm
- Max sheet
- 1500 × 3000 mm
2 – 3 % molybdenum for better resistance to chlorides and cleaning chemicals. Used for food, pharma and coastal sites.
| Tensile strength | ≥ 515 MPa (316L ≥ 485) |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa (316L ≥ 170) |
| Elongation | ≥ 40 % |
| Hardness | ≤ 95 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1375 – 1400 °C |
| Thermal conductivity | 16.3 W/m·K |
| Elastic modulus | 193 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
Questions
Common questions
Which materials can you use for hoppers & chutes?
Common choices are Hot-rolled structural steel, CRCA mild steel, Stainless steel 304, Stainless steel 316 / 316L. Other grades are quoted on request.
What sizes of hoppers & chutes can you make?
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Do you make hoppers & chutes in small batches?
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
What do you need from me for a quotation?
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Get a quote for Hoppers & Chutes
Share the basics now. We follow up for the drawing and any details we need.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.