
Fasteners · 05 of 07
Self-tapping screws
Phillips and slotted tapping screws, ST2.2 to ST6.3, that form their own thread in sheet metal, with no tapping step.
- Laser cutting
- CNC bending
- Welding
- Finishing
Identify your fastener




Overview
Self-tapping screws: what and where
Self-tapping screws form their own thread in sheet metal, which removes a tapping operation on thin panels.
- Standards
- 4
- Size range
- ST2.2 – ST6.3
- Usual grades
- SS 304 / SS 410
Used in
- Sheet metal covers
- HVAC ducting
- Enclosure doors
- Nameplates
- Appliance panels
- Trims & cladding
Types
4 types, one family
Phillips and slotted tapping screws for sheet metal. Each type below is manufactured to the standard shown, in the grades listed further down.
- 01
DIN 7981 / ISO 7049
Phillips pan head
Pan head with a cross recess and ST thread.
Used forCovers and panels on thin sheet
- 02
DIN 7982 / ISO 7050
Phillips countersunk
Flush head for countersunk holes.
Used forFlush fixing on sheet and plastic
- 03
DIN 7971 / ISO 1481
Slotted pan head
Pan head with a slot.
Used forLight fixing, legacy parts
- 04
DIN 7972 / ISO 1482
Slotted countersunk
Flush head with a slot.
Used forNameplates, trims
Technical data
Standards, sizes and dimensions
| Standard | Description | Size range |
|---|---|---|
| DIN 7981 / ISO 7049 | Phillips pan head tapping screws | ST2.2 – ST6.3 |
| DIN 7982 / ISO 7050 | Phillips CSK tapping screws | ST2.2 – ST6.3 |
| DIN 7971 / ISO 1481 | Slotted pan head tapping screws | ST2.2 – ST6.3 |
| DIN 7972 / ISO 1482 | Slotted CSK tapping screws | ST2.2 – ST6.3 |
| Size | Thread diameter (mm) | Pitch (mm) |
|---|---|---|
| ST2.2 | 2.2 | 0.8 |
| ST2.9 | 2.9 | 1.1 |
| ST3.5 | 3.5 | 1.3 |
| ST3.9 | 3.9 | 1.3 |
| ST4.2 | 4.2 | 1.4 |
| ST4.8 | 4.8 | 1.6 |
| ST5.5 | 5.5 | 1.8 |
| ST6.3 | 6.3 | 1.8 |
Nominal values from the standard. Lengths follow the standard series; non-standard lengths on request.
| Thread | ISO 1478 ST form |
|---|---|
| Point | Type C pointed / F flat as specified |
| Drive | Phillips or slotted |
| Grade | SS 304 / SS 410 |
| Stainless steel grades | 202 · 304 · 310 · 316 · 316L · 410 |
| Other materials | HT · MS · Copper · Brass · Titanium |
Usually manufactured in:
- SS 304 (A2)
- SS 410
| Grade | Designation | Magnetic | Density | Max service temp. | Best for |
|---|---|---|---|---|---|
| SS 304 (A2) | EN 1.4301 | No (annealed) | 8.00 g/cm³ | ≈ 870 °C | General-purpose; most common stainless fastener |
| SS 410 | EN 1.4006 (martensitic) | Yes | 7.75 g/cm³ | ≈ 650 °C | Hardenable; used for tapping screws and wear parts |
Choosing
Picking the right one
Quick guidance from the standards. For critical joints, follow your design calculation.
Point type
Type C (pointed) finds the hole and suits most sheet work. Type F (flat end) is used where the tip must not stand proud behind the sheet.
Pilot hole size
Drill the pilot slightly larger than the thread core. Follow the screw maker’s chart for your sheet thickness and material.
Which stainless?
SS 304 for corrosion resistance in thin, soft sheet. SS 410 is hardened and taps more easily into steel sheet, but resists corrosion less.
Quick quote
Quote for self-tapping screws
Tell us the standard, size, length, grade and quantity. We confirm manufacturing lead time and price.
- Reply with a quotation for prototypes or batches
- Reference number by email as soon as you send
- Or call Daksh Shah on +91 90823 86814
Quote checklist
Tap what you already have
- Cut3 kW fibre laser
- Bend100 t, 3200 mm
- WeldLaser · TIG · arc
- FinishGrind · polish
Have a drawing ready? Send it for a quote.
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.