Materials
Mild steel, stainless steel and aluminium to the drawing.

OEM Sheet Metal Components
Formed channels, cable trays and component trays made to your profile.
Manufacturing scope
Channels and trays are formed from laser-cut blanks, with slots, holes and end details cut in the flat before bending.
Illustrative geometry; final design follows your approved drawing.Technical review
Mild steel, stainless steel and aluminium to the drawing.
Laser cutting of blanks and patterns, CNC bending on a 3200 mm working length, welding of corners where required.
Profile dimensions, straightness, slot positions and corner finish.
Typical customers: Machine builders, material-handling and equipment manufacturers.
Tolerances and inspection requirements are agreed against the actual drawing. Samples and repeat batches are quoted separately.
Related products
L, U and Z brackets, gussets and support plates for OEM assemblies.
View pageCut, formed and welded subassemblies supplied ready for your assembly line.
View pageSee the full product family and its manufacturing scope.
View pageProduct data
Channels and trays are bent on the five-axis press brake to your profile, including cable trays, component trays and C or U channels up to 3200 mm long.
Used in
Equal or unequal flanges
With slots and return flanges
Welded rungs or punched base
Folded corners, welded or riveted
| Max length | 3200 mm per piece |
|---|---|
| Thickness | 1.2 – 3 mm typical |
| Laser cutting | MS up to 20 mm · SS up to 12 mm · Al / Cu up to 6 mm |
| Max bend length | 3200 mm on 100 t, five-axis CNC (LVD-YSD PPES 1032) |
| Finish | Deburring, grinding, polishing in-house; powder coat, plating or PVD through approved suppliers |
| Inspection | Dimensions checked against your drawing revision before dispatch |
| Order size | Prototype, pilot and repeat batches |
Carbon steel
IS 513 (CR1–CR4) · DC01–DC04
Smooth cold-rolled surface for painted or powder-coated parts. The usual choice for enclosures, covers and brackets.
| Tensile strength | 270 – 410 MPa |
|---|---|
| Yield strength | ≤ 280 MPa (grade dependent) |
| Elongation | 28 – 38 % |
| Hardness | ≈ 50 – 65 HRB |
| Density | 7.85 g/cm³ |
|---|---|
| Melting range | 1450 – 1520 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Coated carbon steel
IS 277 · coating Z120 – Z275
Pre-galvanised sheet for trays, ducts and covers that need corrosion protection without painting.
| Tensile strength | ≈ 270 – 500 MPa (base grade) |
|---|---|
| Yield strength | ≈ 180 – 350 MPa |
| Elongation | ≥ 22 % |
| Zinc coating | 120 – 275 g/m² (both sides) |
| Density | 7.85 g/cm³ |
|---|---|
| Zinc melting point | 420 °C |
| Thermal conductivity | ≈ 50 W/m·K |
| Elastic modulus | 200 GPa |
Austenitic stainless
ASTM A240 · EN 1.4301
General-purpose stainless with good corrosion resistance and weldability. Non-magnetic when annealed.
| Tensile strength | ≥ 515 MPa |
|---|---|
| Yield strength (0.2 %) | ≥ 205 MPa |
| Elongation | ≥ 40 % |
| Hardness | ≤ 92 HRB |
| Density | 8.00 g/cm³ |
|---|---|
| Melting range | 1400 – 1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Elastic modulus | 193 GPa |
Aluminium alloy
ASTM B209 · EN AW-5052
Bends well and resists corrosion. The usual aluminium for formed housings, chassis and panels.
| Tensile strength | 215 – 265 MPa |
|---|---|
| Yield strength | ≥ 160 MPa |
| Elongation | 7 – 12 % |
| Hardness | ≈ 60 HB |
| Density | 2.68 g/cm³ |
|---|---|
| Melting range | 607 – 649 °C |
| Thermal conductivity | 138 W/m·K |
| Elastic modulus | 70 GPa |
Typical published values for the grade. Actual values follow the mill test certificate of the supplied lot.
| Width (mm) | Side height (mm) | Typical sheet |
|---|---|---|
| 50 | 25 / 50 | 1.2 mm |
| 100 | 50 | 1.5 mm |
| 150 | 50 | 1.5 mm |
| 200 | 50 / 75 | 1.6 mm |
| 300 | 50 / 75 | 2.0 mm |
| 450 | 75 / 100 | 2.0 mm |
| 600 | 100 | 2.0 mm |
Standard piece lengths 2500 or 3000 mm; bends and covers made to match.
Questions
Common choices are CRCA mild steel, Galvanised steel (GI / GP), Stainless steel 304, Aluminium 5052-H32. Other grades are quoted on request.
Flat blanks up to 1500 x 3000 mm from one sheet and bends up to 3200 mm long on a 100-ton, five-axis CNC press brake. Larger parts are made in welded or bolted sections.
Yes. We make prototypes and first-off samples for approval, then repeat batches from the recorded setups.
A drawing (DXF, DWG, STEP or PDF) with its revision, the material grade and thickness, quantity, finish and delivery date. A STEP file helps for bent and welded parts.
Quick quote
Share the basics now. We follow up for the drawing and any details we need.
Quote checklist
Tap what you already have
Share the drawing, material, quantity, finish and delivery date. We review it and reply with a quotation for prototypes or repeat batches.
Your privacy choices
We use necessary storage to run this site and remember your choices. With your consent we also use Google analytics and marketing tags to understand how the site is used, and load the Google Maps location map. These can set cookies. You can change this any time under “Cookie settings”. Privacy policy
Vinay Metal
Sales team · replies on WhatsAppContinue on WhatsApp
Scan with your phone camera. WhatsApp opens with your message ready to send to Daksh Shah.
Open WhatsApp